D15329.08 SX20 Administrator Guide CE9.2, NOVEMBER 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
42
Cisco TelePresence SX20 Quick Set Administrator Guide
Add corporate branding to the screen and Touch 10 user interface (page 2 of 2)
Branding in the halfwake state
In halfwake state you can:
• Add a background brand image (screen and
Touch 10)
• Add a logo in the bottom right corner (screen
and Touch 10)
• Customize or remove the message at the center
of the screen (only on screen, not on Touch 10).
This is the message that informs the user how to
start using the video system
In general, we recommend that you keep the
standard message. Change the message only if
you have to adapt it to a different scenario, for
example if you have a third party user interface.
Logo
We recommend:
• A white logo (so that it goes well with the dark
background brand image)
• PNG-format with transparent background
• Minimum 272×272 pixels
Background brand image
• When the video system wakes up, the
image is shown in full color; after a few
seconds the image is automatically dimmed
(transparent black overlay)
• Image format: PNG or JPEG
• Recommended size: 1920 × 1080 pixels
Custom message
The text you add in the input field will replace the
standard text.
"" (empty string): Restores the standard text
" " (a space): Removes the standard text
without adding a custom text
Standard text
Cannot be customized
To Next Page
Loading...
