Cisco WAP100 Series Administration Guide

Single Point Setup
Cluster Firmware Upgrade
Cisco WAP571/E Administration Guide 186
12
STEP 1 Select HTTP for Transfer Method.
STEP 2 If you know the name and path to the new file, enter it in the New Firmware Image
field. Otherwise, click the Browse button and locate the firmware image file on
your network.
The firmware upgrade file supplied must be a tar file. Do not attempt to use bin
files or files of other formats for the upgrade; these types of files do not work.
STEP 3 Click Start-Upgrade to apply the new firmware image.
NOTE Overall upgrade status shows the combined upgrade status (Not Initialized/In
Progress/ Completed/Fail/Abort_admin/ None) of all the cluster members.
To stop the cluster member upgrade from Dominant AP:
Click Stop-Upgrade.

Cisco WAP100 Series Specifications

General

Brand	Cisco
Model	WAP100 Series
Category	Wireless Access Point
Language	English