Page 2 | 53
Safety Instructions
This manual is intended to ensure that user can use the product properly without danger or any property loss.
Please read it carefully and do not discard for future reference. Precaution measures are divided into
“WARNINGS” and “CAUTIONS” as below:
WARNING: Neglecting any of the warnings may cause serious injury.
CAUTIONS: Neglecting any of the CAUTIONS may cause injury or equipment damage.
WARNING
• Use recommended cord sets (power cords) with the correct specifications.
CAUTIONS
• Do not place or install equipment directly in sunlight or near heating devices.
• Keep equipment installed correctly and fully.
• Install the equipment in a well-ventilated place, do not block vents.
• Only use equipment within rated input/output.
• Transport, use, and reserve the equipment within the proper humidity range (10 to 90%) and
temperature range (14 to 131°F, -10 to 55℃).
• When cleaning the device, unplug the power cord and completely shut off the power.
• Do not use volatile solvents such as alcohol, benzene, or thinner when cleaning the device. Do not use
strong or abrasive cleaning agents. This can damage the surface coating.
• Purchase the NVR dedicated hard drive recommended by the equipment manufacturer from the correct
channels to ensure the quality and usage requirements of the hard drive.
• Make sure that the alarm cable is firmly installed with a solid contact.
• Make sure that the NVR is properly grounded.
NOTE: After receiving the product, verify the contents of the package according to the packing list in the box.
To Next Page
Loading...
