Chapter 1: Introduction
System overview 3
1111
The SAILOR 3027 can be connected to a SAILOR 6018 Message Terminal,
where you can read and write messages and send Distress alerts (SAILOR
6150 only). This communication is transmitted via the SAILOR 3027
to/from the Inmarsat C satellite network.
Scripting
The SAILOR 6194 Terminal Control Unit supports simple scripting, using
Lua language. Scripting can be used e.g. for automatically reacting on
events registered in the multipurpose input/output pins of the SAILOR
6194. With the Script option you can run custom-designed scripts
dedicated to specific applications with the SAILOR 3027.
Typically a script monitors and controls the SAILOR 3027 by using
commands via the command shell interface. The scripts are run from an SD
memory card installed in the SD card slot of the SAILOR 6194. For further
information on scripting, see the manual for the SAILOR 6194 Terminal
Control Unit.
To Next Page
