COBHAM SAILOR 6130 - Receive Egcs

Chapter 3: To use easyMail
44 Receive EGCs
2. Select the DNID information (provider, LES, DNID and member number)
for each ocean region.
3. Select the time to start the position reporting or select Immediately.
4. Select the interval between the position reports.
5. Click OK.
The program is now set up and you can start and stop it with the
buttons as described in the previous section.
6. Click OK again to exit the PU Reporting Setup page.
Receive EGCs
You can receive various types of EGCs in easyMail. For details about how to
set up which EGCs to receive, see Set up reception of EGCs on page 52.
Note
To be able to receive FleetNET EGCs, an ENID must be
downloaded and enabled in the SAILOR 3027. See Set up ENIDs
on page 53.
Note
When the EGC Inbox is full, the oldest EGCs are automatically
deleted.