EasyManua.ls Logo

COBHAM SAILOR 6130 - User Interfaces

COBHAM SAILOR 6130
114 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2: Get started
14 User interfaces
User interfaces
If you are going to use your mini-C system for anything other than
automatically transmitting reports, you should have a user interface for
accessing the mini-C system. In Non-SOLAS Distress systems a user
interface is mandatory, because of the need for safety communication.
You can control the mini-C system in two ways:
Using the easyMail application installed on a computer. The computer
must be connected via the LAN interface in the SAILOR 6194 Terminal
Control Unit to the mini-C system.
Using a SAILOR 6018 Message Terminal. The SAILOR 6018 must be
connected to the CAN interface of the system.
easyMail application
Install easyMail
To install the easyMail application on your computer, do as follows:
1. Go to www.cobham.com/satcom
.
2. Select Cobham SYNC Partner Portal.
3. Select Downloads > Product software > Maritime.
4. Search for the easyMail software.
5. Click Download.
6. When the zip file is downloaded to your computer, extract the setup file
from the zip file.
7. Run the setup file and go through the InstallShield Wizard.
8. When the Wizard is complete, you can start the application from the
easyMail shortcut on the desktop, or from the Start menu.

Other manuals for COBHAM SAILOR 6130

Related product manuals