98-175666-A Appendix D: Command line interface D-3
List of commands
• help
• navigation
• status
• system
• test
• iothub
D.2.1 antenna_data
D.2.2 calib
D.2.3 config
Command Description
antenna_data
Shows detailed information of this specific command.
antenna_data type
Shows current antenna type. Example output:
UCLI:/$ antenna_data type
System: 7509D
Type: 2
Oem: inmarsat
sub type: 0
lnb type: 1
buc type: 4
antenna_data type
antenna type [<adu-id> [<sub-type>]]: sets the antenna
type and the optional sub-type.
Table D-2: UCLI command: antenna_data
Command Description
calib
Shows the commands for encoder, ZRM and compass
calibration
calib zrm
Start XEL/ELE ZRM calibration
calib ?
Other calibrations currently not supported
Table D-3: UCLI command: calib
Command Description
config
Shows detailed information of this specific command.
config current_list
Shows the current configuration.
Table D-4: UCLI command: config
To Next Page
Loading...
Need help?
General