InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
The backlight is off all the time
The backlight is on all the time
11.2.2.21 Setpoint: UserBtn pulse
This setpoint adjusts the duration of User Button 1..16 pulse. For more
information read the description of LBO User Button 1.
11.2.2.22 Setpoint: ImpCountDef1-4
This setpoint adjusts the value to which the corresponding Impulse counter
statistic is set when the binary input ImpCountSet1-4.
11.2.2.23 Setpoint: ConvCoefPulse1
The conversion ratio between incoming pulses at binary inputs PulseCounter
1/2/3/4 and output statistic values PulseCounter 1/2/3/4. The ratio defines
how many pulses (rising edges) have to be sensed at the input in order to
increase the output value. Unfinished “invisible” parts are stored in the
controller even in the case of power supply failure. Physical unit of the output
statistic value has to correspond to the ratio unit “/X”.
To Next Page
Loading...