ComAp InteliMains NT IM-NT-BB - Page 388

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
388
CAUTION!
Each language change causes the reinitialization of the display. Function of
the controller is not influenced.
13.2.1.103 Binary input: Lang sel D#2 C
Related FW
standard v3.1.0
Description
This is one of three binary inputs Lang sel D#2 A, Lang sel D#2 B, Lang sel
D#2 C, used for selecting language of the external local terminal #2.
NOTE:
Using these inputs for language selection is an option only. If the inputs are
not configured, the language can be selected using the menus on the
terminal.
ENCODING TABLE
LANGUAGE INDEX
INPUT A
INPUT B
INPUT C
0
0
0
0
1
1
0
0
2
0
1
0
3
1
1
0
4
0
0
1
5
1
0
1
6
0
1
1
7
1
1
1
NOTE:
"0" in the table means the input is not active or not configured.
NOTE:
Language index 0 selects the default language of the terminal, i.e. the
language, which is adjusted in the terminal using it's menus.
NOTE: