i. Backlight
The display can be set to a lower brightness level. To access this feature, press and hold the
Menu knob > System settings > Backlight.
For the On level (whenever the unit is On), select from High, Medium, Low, or Ultra low
(designed for a very dark room).
For the Dim level (whenever the unit is in Standby), select from Medium, Low, Ultra low (designed
for a very dark room), or Off. For Dim level to take effect in standby you must also select a
value under Timeout, after which the Dim level setting will take effect in standby after the
selected period of time.
Backlight Off: In standby, press any remote control key twice except Power and Alarm to toggle the display
off/on. When the display is off, press any remote key once (except Power and Alarm) to turn the display on
for 7 seconds and then off again. If the remote control isn’t nearby, you can also press the Menu or Source
knob in twice briefly in standby mode to turn the display off, twice again to turn it back on, and once while
the display is off to turn it on temporarily. Once turned on, the display will return to the previous Backlight
Menu setting when placed in standby again. The display can also be turned off by selecting “Off” in the Dim
level of the Backlight control in the System settings menu along with a Timeout value.
j. Multi-room
Our models can form part of a Multi-room group. The group can be controlled over a Wi-Fi network
with the Como Audio Control App running on an iOS or Android smart device. A group can also be
set up using the unit’s user interface. With Multi-room, units can be set up as a group with one
device acting as the server and up to four other units acting as clients. Grouping will also reduce
or eliminate any latency (audio delay) between units playing the same source simultaneously.
1. From the Como Control App:
Download the free Como Control iOS or Android App from iTunes or the Google Play store.
The Como Control App will allow you to control many functions along with multi-room.
Choose “CA Solo”, “CA Duetto”, etc. as the Server or Client device via the App on the smart
device acting as the controller. The device which has the Como Control app must be
connected to the same WiFi network as the unit.
Note: The “CA Solo”, “CA Duetto”, etc. ‘friendly’ name can be changed via the App or on the unit’s Web
page.
2. From the unit’s Menu:
Press and hold the Menu knob > System settings > Multi-room for the available Multi-
room controls.
From the Multi-room menu on your unit, the following options are available to allow maintenance
of groups:
• View details
• Create new group
• Add to group
• List current clients
• Leave group
• Dissolve group
26
To Next Page
Loading...