View details
Displays Multi-room details including the name of group and whether it is a server or client
within the group.
Create new group
Allows you to create and name a new group of Como Audio models.
Add to group
Enables you to add available units to the current group.
List current clients
If this unit is acting as the Server for a group, this option lists the client units in the group.
Leave group
Allows you to remove the unit from its current group and act as an individual unit.
Dissolve group
Enables the dissolution of the current group to which the unit belongs. All units within the group
then act as individual units available to be added to other groups.
k. Listening mode (Non-North American units only)
For energy conservation, if the unit is left on but there has been no sound and none of the controls
have been used after approximately 20 continuous minutes, the unit will automatically go into standby.
Listening mode: Switching this feature on will prevent the unit from going into auto standby after 20
minutes of no sound/use when in Auxiliary mode only. To access Listening mode, press and hold the Menu
knob > System settings > Listening mode.
l. System reboot
If you experience an issue, try the System reboot before performing a Factory reset since a reboot will not
require you to repeat the Wizard set up or delete your Presets or other adjustable settings as will be the
case following a Factory reset. Musica and Amico also have a dedicated reboot button on the rear panel.
m. Streaming quality (Musica only)
If music buffers frequently or you experience a lag time using Tidal or Deezer, try using the “Normal” or “Low”
setting. Note Spotify Connect, Napster, and Amazon Music currently do not support this feature.
To Next Page
Loading...