Comtech EF Data LPOD PS 1.5 - PS 2 J3 | POWER IN AC Power Main; Table 2-3. PS 2 J3 | POWER IN Pin Assignments

Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
Revision 15
System Connectors, Installation, and Startup 2–7 MN-LPOD
2.3.3.2 PS 2 ‘J3 | POWER IN’ AC Power Main
The mating connector specification and the pin assignments specific to the PS 2
AC power interface are as follows:
Mating Connector:
CEFD P/N CN/MS-STPG03F07 (Glenair ITS-3106F20-19SF7)
Table 2-3. PS 2 ‘J3 | POWER IN’ Pin Assignments
Pin
Description
A
GND
B
NEUTRAL (L2)
C
LINE (L1)