Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
Revision 15
Ethernet Interface Operation 4–2 MN-LPOD
4.2 SNMP Interface
SNMP is an Internet-standard protocol for managing devices over IP networks. An SNMP-managed
network has three key components:
• The managed device. This includes the LPOD.
• The SNMP Agent. This software runs on the LPOD. The LPOD SNMP Agent supports
both SNMPv1 and SNMPv2c.
• The user-supplied NMS. This software runs on the User PC.
4.2.1 MIB Files
MIB files are used for SNMP remote management of a unique device, and consist of a tree of
nodes called Object Identifiers (OIDs). Each OID provides remote management of a particular
function. These MIB files should be compiled in a user-supplied MIB Browser or SNMP Network
Monitoring System server.
In these LPOD MIB file names, the letter x represents the revision of the file.
4.2.1.1 CEFD Root MIB File
• FW-0000291x.mib
• CEFD MIB file gives the root tree for all CEFD LPOD products (PSx) and consists of only
the following OID:
o Name: comtechEFData
o Type: MODULE-IDENTITY
o OID: 1.3.6.1.4.1.6247
o Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtechEFData(6247)
Module: ComtechEFData
4.2.1.2 LPOD MIB File
• FW-0000289x.mib
• MIB file consists of all of the OID’s for management of the LPOD functions
4.2.1.3 LPOD Traps MIB File
• FW-0000290x.mib
• Trap MIB file provides SNMPv1 traps common for LPOD.
To Next Page
Loading...
