Comtech EF Data LPOD PS 1.5 - PS 1.5 J3 | POWER IN DC Power Main; PS 2 J3 | POWER IN DC Power Main; Table 2-5. PS 1.5 J3 | POWER IN Pin Assignments; Table 2-6. PS 2 J3 | POWER IN Pin Assignments

Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
Revision 15
System Connectors, Installation, and Startup 2–9 MN-LPOD
2.3.4.2 PS 1.5 ‘J3 | POWER IN’ DC Power Main
The mating connector specification and the pin assignments specific to the
PS 1.5 DC power interface are as follows:
Mating Connector:
CEFD P/N CN-0020517 (MS3116E-14-5S(476), Amphenol PT06E-14-5S(476))
Table 2-5. PS 1.5 ‘J3 | POWER IN’ Pin Assignments
Pin
Description
A
+48 V
B
+48 V
C
-48 V
D
-48 V
E
GND
2.3.4.3 PS 2 ‘J3 | POWER IN’ DC Power Main
The mating connector specification and the pin assignments specific to the PS 2
DC power interface are as follows:
Mating Connector:
CEFD P/N CN/CA3106E2222SB (ITT Cannon CA3106E22-22SB)
Table 2-6. PS 2 ‘J3 | POWER IN’ Pin Assignments
Pin
Description
A
V+
B
NO CONNECT
C
NO CONNECT
D
V-