FSG/MTM/001 060511
28
3.3.7 Hints
+3.3 V is used as supply for the SUC-, CBE/CBF-, IMB/IMD-, and SKD-Boards.
+5.3 V is used as supply for LME-, CBE/CBF-, SUC-, IMB/IMD-Boards, and MDA-
Board.
+12 V is used as supply for the LME- and CBE/CBF-Board, for the Camera Motor on
the Camera Board and for the fan, and via the MDA-Board for the Elevation Motor
(ATAC).
+24 V is used on the LME-Board for the Stepper Motor driver.
To Next Page
Loading...