Continuum Precision II Series User Manual

iii
Operation and Maintenance Manual
C
996-0255 rev. b
WARNING
Oscillator Burns Amplifier Burns
The voltage setting on the PU600C series power units at the time of installation, may NOT be exceeded
without consulting the Continuum Service office first. Exceeding the designated voltage can result in
free-running (see Section II), thermal focusing and optical damage. Failure to follow these precautions
will result in voiding the warranty (see Section VII).
Energy Spec.
Measured Energy Wavelength Voltage CB delays
Harmonic Burns Harmonic Burns
System Operation Data Sheet
Project #:
Date:
User:

Continuum Precision II Series Specifications

General

Brand	Continuum
Model	Precision II Series
Category	Measuring Instruments
Language	English