Crestron XPanel Prodigy
®
System
3. Click the scene to be recalled.
Dimmers and switches in a room can be independently controlled.
For instructions, refer to “Control a Switch or Dimmer” below.
Store a Scene
The current light settings can be saved as a scene for recall at a later time.
To save light settings as a scene:
1. Adjust the room’s lighting to the desired level(s) as described in
“Control a Switch or Dimmer” below or go to a dimmer or switch and
adjust the lighting as described in “P-DIMEX Prodigy Single Button
Wireless Dimmer and P-SWEX Prodigy Single Button Wireless
Switch” on page 129.
2. To store the scene, click and hold (for three seconds) the scene
name to be saved.
Control a Switch or Dimmer
XPanel can be used to turn the lights on or off as well as raise or lower the
lighting level (P-DIMEX only).
1. Select the room to be controlled as described in steps 1-2 on page
110.
System User Guide – DOC. 7007B Prodigy System: PMC2 • 111
To Next Page
Loading...
