Crestron Prodigy System User Manual

Crestron XPanel Prodigy
®
System
c. Set the desired temperature setpoint(s). To lower the heating or
cooling setpoint, click the j button under the setting to be
changed. To raise the heating or cooling setpoint, click the k
button under the setting to be changed.
Hold Setting
The Hold function allows you to maintain a temperature setpoint until the
Hold function is disabled. Any changes caused by a program change are
ignored while the Hold function is enabled.
Click HOLD to enable the Hold function. Click RUN to disable the Hold
function and resume the set operating schedule.
System User Guide – DOC. 7007B Prodigy System: PMC2 • 119

Crestron Prodigy System Specifications

General

Brand	Crestron
Model	Prodigy System
Category	Control Systems
Language	English