Prodigy
®
System Crestron PTX3
Media Controls
Select a Source
1. Press the soft button labeled MEDIA or touch (from the Home
page) to display the Media page. A list of devices will be displayed.
NOTE: If your system has two or more room outputs, the ROOM
SELECT button will be displayed. Touch ROOM SELECT to choose
the room to be controlled. For more information, refer to “Room
Selection (if equipped)” on the following page.
NOTE: The devices shown may differ from your system.
2. Touch a device name to select a source for control. If the system
receiver is equipped with a tuner, press the button on the side of the
remote labeled MORE to display the receiver’s tuner controls.
NOTE: If your system is equipped with a PT-AMFMXM Radio Tuner,
touch AM-FM or XM from the device list to control the PT-AMFMXM.
The MUTE, , and
buttons will always control the mute
function and system volume.
6 • Prodigy System: PMC2 System User Guide – DOC. 7007B