Crestron Prodigy System - Lighting Scene Recall and Adjustment

Prodigy
®
System Crestron PTX3
Lighting Control
In a Prodigy system, preprogrammed lighting scenes are used to create a
desired lighting effect. These scenes can be recalled or stored. Individual
lighting circuits can also be switched or dimmed to your personal preference.
Recall Lighting Scenes and Other Lighting Controls
Lighting scenes in a theater or other controlled room can be recalled by the
PTX3. To recall a lighting scene:
1. Press the soft button labeled LIGHTS or touch
(from the Home
page) to display the room’s scene controls.
NOTE: The scene names may differ.
2. To recall a scene, touch the scene to be recalled.
Dimmers and switches in a room can also be independently
controlled from the PTX3. For instructions, refer to page 26.
24 • Prodigy System: PMC2 System User Guide – DOC. 7007B