Prodigy
®
System Crestron PTX3
3. Touch the scene to be recalled.
Dimmers and switches in a room can also be independently
controlled. For instructions, refer to “Control a Switch or Dimmer”
below.
Store a Scene
The current light settings can be saved as a scene for recall at a later time.
To save light settings as a scene:
1. Adjust the room’s lighting to the desired level(s) as described in
“Control a Switch or Dimmer” below or go to a dimmer or switch and
adjust the lighting as described in “P-DIMEX Prodigy Single Button
Wireless Dimmer and P-SWEX Prodigy Single Button Wireless
Switch” on page 129.
2. Touch and hold (for three seconds) the scene name to be saved.
Control a Switch or Dimmer
The PTX3 can be used to turn the lights on or off as well as raise or lower the
lighting level (P-DIMEX and P-LDIMEX only).
1. Select the room to be controlled as described in steps 1-2 on page
25.
2. Press the button on the side of the remote twice to display the
individual lighting controls.
26 • Prodigy System: PMC2 System User Guide – DOC. 7007B
To Next Page
Loading...
Need help?
General
