Prodigy
®
System Crestron PTX3
2. Touch PROGRAM to display the programming controls.
a. Select the time zone to set using the I or h buttons.
b. Set the temperature setpoint(s). To lower the heating or cooling
setpoint, touch the j button under the setting to be changed. To
raise the heating or cooling setpoint, touch the k button under
the setting to be changed.
c. Set the start time for the time zone using the k or j buttons. To
remove the time zone from the schedule, touch REMOVE.
d. Touch MAIN to return to the climate controls.
Hold Setting
The Hold function allows you to maintain a temperature setpoint until the
Hold function is disabled. Any changes caused by a program change are
ignored while the Hold function is enabled.
Touch HOLD to enable the Hold function. Touch RUN to disable the Hold
function and resume the set operating schedule.
Maintenance
Battery
The PTX3 is powered by a lithium polymer rechargeable battery.
Battery life is indicated in the upper-right corner of the display.
When not in use, the PTX3 should be placed in its included docking
station/charger.
Cleaning
Keep the surface of the touchscreen free of dirt, dust or other materials that
could degrade optical properties. Long-term contact with abrasive materials
can scratch the surface, which may detrimentally affect image quality.
34 • Prodigy System: PMC2 System User Guide – DOC. 7007B
To Next Page
Loading...
Need help?
General
