Crestron PTL4 Prodigy
®
System
2. Touch ROOM SELECT to display a list of controlled rooms.
3. To select a room, touch the name of the room to be controlled. To
scroll through the list of controlled rooms, touch the k or j buttons.
4. Touch the scene to be recalled.
Dimmers and switches in a room can also be independently
controlled. For instructions, refer to “Control a Switch or Dimmer” on
page 56.
Store a Scene
The current light settings can be saved as a scene for recall at a later time.
To save light settings as a scene:
1. Adjust the room’s lighting to the desired level(s) as described in
“Control a Switch or Dimmer” on page 56 or go to a dimmer or switch
and adjust the lighting as described in “P-DIMEX Prodigy Single
Button Wireless Dimmer and P-SWEX Prodigy Single Button
Wireless Switch” on page 129.
2. Touch and hold (for three seconds) the scene name to be saved.
System User Guide – DOC. 7007B Prodigy System: PMC2 • 55
To Next Page
Loading...
Need help?
General
