Prodigy
®
System Crestron PTL4
Scheduled Operation
A controlled climate zone can be set to maintain temperature setpoints on a
timed schedule. A daily schedule can be created for weekday (Monday
through Friday) and weekend (Saturday through Sunday) operation. Each
daily schedule can be divided into four time zones:
• Wake: Set to the time when you wake up and the desired
temperature you want during the morning until you leave.
• Leave: Set to the time you leave the home and the temperature you
want while you are away (typically set to an energy-saving setting).
• Return: Set to the time you return home and the temperature you
want during the evening, until bedtime.
• Sleep: Set to the time you go to bed and the temperature you want
overnight (typically set to an energy-saving setting).
A climate zone can also be set to an “Away” setting where a specified
temperature setpoint will be maintained until the scheduled program is set to
resume. This is typically set to an energy-saving setting.
Any temperature setpoint can be held using the Hold function. The Hold
function overrides any scheduled programming.
Run the Scheduled Program
To run a scheduled program:
1. Select the zone to be controlled as described on page 56.
2. Touch RUN to run the scheduled program.
60 • Prodigy System: PMC2 System User Guide – DOC. 7007B
To Next Page
Loading...
Need help?
General
