Crestron PT-AMFMXM Prodigy
®
System
Category Tuning (XM Only)
To tune by category:
1. Select the XM tuner as described in “Select a Band” on page 124.
2. Press MENU to display the list of options.
3. Press j or k to display Categories and press ENTER.
4. Press j or k until the desired category is displayed and press
ENTER.
5. Press j or k until the desired channel is displayed and press
ENTER.
Store/Recall Presets
Each band of the PT-AMFMXM can store and recall up to 20 preset stations.
To store a preset:
1. Tune a station as described in “Manual Tuning” on page 124, “Scan
Tuning (AM and FM Bands Only)” on page 124, or “Category Tuning
(XM Only)” above.
2. Press MENU.
3. Press j or k until Presets is displayed.
4. Press ENTER to display the list of presets.
5. Press j or k until the desired preset location is displayed.
6. Press and hold ENTER for three seconds until the Saving Preset
message is displayed.
To recall a preset:
1. Select a band as described in “Select a Band” on page 124.
2. Press MENU to display the list of options.
3. Press j or k to display Presets and press ENTER.
4. Press j or k until the desired preset location is displayed.
5. Press ENTER to recall the preset.
Display Station Information
A tuned station may contain information about the station, the artist, or the
song that is current playing.
To view available information, press DISP. Press DISP again to view
additional information.
Advanced Features (XM Band)
The PT-AMFMXM can display information about the XM radio tuner such as
the Radio ID and signal strength.
To view the Radio ID:
1. Select the XM tuner as described in “Select a Band” on page 124.
2. Press MENU to display the list of options.
System User Guide – DOC. 7007B Prodigy System: PMC2 • 125
To Next Page
Loading...
Need help?
General
