Crestron Prodigy System User Manual

Prodigy
®
System Crestron PAMP-4X100
Volume Control Mode
The volume level of a connected room can be controlled when the room is in
the Volume Control mode. To switch to the Volume Control mode:
1. Press and hold the ROOM button of the room to be controlled for two
seconds.
• Press j or k to change the volume in 1 dB increments.
• Hold j or k for more than one second, to ramp the volume up
or down in 1 dB/.1 second increments.
If the maximum volume or minimum volume is reached, all front
panel LED’s will blink three times.
2. Press the ROOM button again to exit the Volume Control mode.
If j or k is not pressed for 10 seconds, the PAMP-4X100 will
automatically exit the Volume Control mode.
128 • Prodigy System: PMC2 System User Guide – DOC. 7007B

Crestron Prodigy System Specifications

General

Brand	Crestron
Model	Prodigy System
Category	Control Systems
Language	English