CVC 400 - Error Message

CVC TECHNOLOGIES, INC. CVC 400 OPERATION MANUAL
16.3 Error Message
a. Product sensor error:
PRODUCT SENSOR ERR
PLEASE CHECK
PRESS ‘START’ KEY
5 SEC. RESTART
Problem: Product sensor malfunctions or
product is abnormal.
After solving the problem, press START
key for 5 seconds to restart the machine.
b. Label sensor error:
LABEL SENSOR ERR
PLEASE CHECK
PRESS ‘START’ KEY
5 SEC. RESTART
Problem: Label sensor malfunctions or
label missed.
After solving the problem, press START
key for 5 seconds to restart the machine.
16 - 4