CVC TECHNOLOGIES, INC. CVC 400 OPERATION MANUAL
13.3 Air Regulator Set Maintenance (Optional for C60 Hot Stamp Printer)
The air regulator is equipped with an air filter; drain the accumulated water of the reservoir and check
after every usage. Inspect and ensure the lubrication oil reservoir is sufficient.
Oil filler nozzle plug
Lubricant regulator
Water reservoir
Lubricant level
Auto water draine
Fig 13.3-1
Lubricant type Viscosity range
Festo special oil
Aral vitam GF32
Esso Nuto H32
Mobil DET24
BP Energol HLP32
32 mm
2
/s
(=cSt) at 40
o
C
ISO-Class VG32 as per ISO 3448
13.4 Sensor Maintenance
All the sensors installed on this machine which do not require any maintenance. We recommend that
you do the following step at regular intervals:
a. Clean the optical interfaces.
b. Check the screw connections and plug-in connections.
13 - 2
To Next Page
Loading...