CVC 400 - Label Specifications

CVC TECHNOLOGIES, INC. CVC 400 OPERATION MANUAL
2.2 Label Specifications
Label Width
15~150mm (⅝" ~ 6")
Label Length 15 ~250 mm (⅝"~ 10")
Backing Paper Translucent backing paper
Label Roll Inner Diameter. Standard: 76 mm (3")
Optional: 38 mm (1½ ")
Max. Roll Outer Diameter Max. 350 mm (16")
Gap between Labels 2 ~ 6 mm (⅛" ~ ¼")
Backing Paper Width 2 mm (⅛") beyond each side of label
Labels Placement on roll
a. Labels are wound around outside (Fig. 2.2.3-1)
b. Labels are wound around inside (Fig. 2.2.4-1)
2.2.1 Label Specification Diagram
Max. 350 mm (16”)
76mm (3“)
(⅛ “)
(⅛ “)
Translucent backin
g
p
a
p
er
(⅛”)
2 - 3
2.2.2 Label Rolled Outside Diagram
The diagram shown below is label rolled outside type; the installation layouts of the label rolled outside
and inside, please refer to chapter 9.2.1.
Fig 2.2-1
Fig 2.2-2