CVC TECHNOLOGIES, INC. CVC 400 OPERATION MANUAL
6 - 5
6.2 Machine Parts Functions
A brief description of the main components functions of the machine are given in this section, please
refer to “Machine Parts Identification” section for the identification of the parts on the machine.
․ No.1: Handwheel for Position-Vertical adjustment of Top Hold-Down Bar, provides the height
adjustment of the top hold down bar.
․ No.2: Emergency Stop Button, depress the button to stop the machine operation immediately
under emergency situations.
․ No.3: Labeling Roller, designed to mount the labeling roller for proper label affixing.
․ No.4: Tension Arm, designed to keep the label straight with a proper tension for smooth labeling.
․ No.5: HHT Control Panel provides to operate and set up parameter of the machine.
․ No.6: Label Roll Disk, provides to load the label web.
․ No.7: Labeling Head A, provides to perform labeling function.
․ No.8: Labeling Head B, provides to perform labeling function.
․ No.9: Main Power Switch provides power supply to the machine.
․ No.10: Top Hold-Down Belt Assembly, is to hold down the products during labeling to prevent
product swinging.
․ No.11: Product Separator (Wheel/Screw), responsible of providing a proper spacing between
bottles for labeling.
․ No.12: Base Support Pad with Swivel Caster, provided to level and move the machine easily.
․ No.13: Rewind Spool, provided to collect the web backing paper after labeling.
․ No.14: Power Box, houses the electrical components and the wirings of the machine.
․ No.15: Conveyor, provides to lead product to the labeling station, and then toward the next
process station on the product packaging line.
․ No.16: Label Peel Blade, provides to peel the label from backing paper.
․ No.17: Alignment Assembly, to align the product in preparation for labeling.
.
To Next Page
Loading...
