CVC TECHNOLOGIES, INC. CVC 400 OPERATION MANUAL
When during cleaning or maintenance no power is required, always switch OFF
and padlock the main power switch.
The electronic equipment inside the electronics cabinet(s) may still be live even
when the main power switch is switched OFF ! Always remove the power supply
cord from the outlet prior to cleaning, inspection or maintenance work. Always
keep the Power Box closed unless required for service purposes.
Setting up and troubleshooting of electrical parts must be carried out by
qualified electrician or engineer. Power Box should not be opened without
permission, connections made by unauthorized personnel is prohibited.
During cleaning, avoid spattering water on the power box or any electric
component.
If cleaning or maintenance must be carried out when the equipment is in
operation, then all reasonable precautions must be taken to avoid personal
injury or equipment damage.
Always use safety steps for tasks above shoulder height.
Stop the machine immediately in the event of any machine malfunction.
Routinely check the machine for worn components and have them replaced.
3 - 7
To Next Page
Loading...
