EasyManuals Logo

D-Link DWC-1000 User Guide

D-Link DWC-1000
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #117 background imageLoading...
Page #117 background image
VPN Settings
117
DWC-1000 Wireless Controller User’s Guide
Field Description
PPTP Client Configuration
MS-CHAPv2
Enables or disables support for MS-CHAPv2 authentication method. Introduces an additional
feature not available with MSCHAP or standard CHAP authentication: the change password
feature. This feature lets the client change the account password if the RADIUS server reports
that the password has expired. Choices are:
Checked = enable support for MS-CHAPv2.
Unchecked = disable support for MS-CHAPv2.
Encryption Supported
Mppe 40 bit
Enables or disables MPPE 40-bit encryption (available only for MS-CHAP and MS-CHAPv2
authentication methods). Choices are:
Checked = enable MPPE 40-bit encryption.
Unchecked = disable MPPE 40-bit encryption.
Mppe 128 bit
Enables or disables MPPE 128-bit encryption (available only for MS-CHAP and MS-CHAPv2
authentication methods). Choices are:
Checked = enable MPPE 128-bit encryption.
Unchecked = disable MPPE 128-bit encryption.
Stateful Mppe
Enables or disables stateful MPPE encryption (available only for MS-CHAP and MS-CHAPv2
authentication methods). Stateful encryption provides the best performance, but may be
adversely affected by networks experiencing substantial packet loss. If you choose stateful
encryption, configure flow control (SETUP > QoS > LAN QoS > Flow Control ) to minimize the
detrimental effects of this lossiness. Choices are:
Checked = enable stateful MPPE encryption.
Unchecked = disable stateful MPPE encryption.
User Time-out
Idle TimeOut
If there is no traffic from a user for more than the specified time out, the connection is
disconnected. Entering an Idle TimeOut value of 0 (zero) means never log out.

Table of Contents

Other manuals for D-Link DWC-1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DWC-1000 and is the answer not in the manual?

D-Link DWC-1000 Specifications

General IconGeneral
Ethernet LANYes
Wi-Fi standards802.11a, 802.11b, 802.11g
Networking standardsIEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3ad, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Number of managed Wi-Fi Access Points (max)6
Security algorithms3DES, DES, WEP, WPA, WPA2
USB 2.0 ports quantity2
Ethernet LAN (RJ-45) ports4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
CertificationFCC B, CE B, VCCI, C-tick, IC, cUL, LVD (EN60950-1)
Built-in displayNo
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Power requirementsDC 12V/2.5A
Power consumption (typical)19.3 W
Pallet width1200 mm
Pallet length1100 mm
Pallet height (air)1419 mm
Pallet height (sea)1847 mm
Pallet gross weight (air)415236 g
Pallet gross weight (sea)545648 g
Quantity per pallet (air)144 pc(s)
Quantity per pallet (sea)192 pc(s)
Shipping (inner) case width296 mm
Shipping (inner) case height428 mm
Shipping (inner) case length354 mm
Shipping (inner) case weight10826 g
Shipping (inner) case net weight10016 g
Number of cartons per pallet (air)36 pc(s)
Number of cartons per pallet (sea)48 pc(s)
Quantity per shipping (inner) case4 pc(s)
Weight and Dimensions IconWeight and Dimensions
Package depth396 mm
Package width273 mm
Package height80 mm
Package weight2504 g
Dimensions (WxDxH)280 x 180 x 44 mm

Related product manuals