49
DWC-1000 Wireless Controller User’s Guide
4. ADVANCED CONFIGURATION SETTINGS
While the basic configuration described in the previous chapter is satisfactory for most
users, large wireless networks or a complex setup may require the wireless controller’s
advanced configuration settings to be configured.
This chapter covers the following commonly used advanced configuration settings.
• QoS Configuration (page 50)
• VLANs (page 56)
• DMZ Settings (page 66)
• Static Routing (page 69)
• Auto-Failover Settings (page 73)
• Load Balancing Settings (page 75)
For information about additional advanced configuration settings not described in this
chapter, see “Additional Advanced Configuration ” on page 77.
Note: The procedures in this chapter should only be performed by expert users who
understand networking concepts and terminology.
To Next Page
Loading...
