Viewing Status and Statistics
154
DWC-1000 Wireless Controller User’s Guide
Authentication Failure Status
Path: STATUS > Access Point Info > Authentication Failure Status
An access point might fail to associate to the wireless controller due to errors such as invalid
packet format or vendor ID, or because the access point is not configured as a valid access
point with the correct local or RADIUS authentication information. The AP
AUTHENTICATION FAILURE STATUS page shows information about access points that
failed to establish communication with the wireless controller.
Figure 7-17. AP AUTHENTICATION FAILURE STATUS Page
An access point can fail due to any of the reasons in Table
7-18.
To Next Page
Loading...
