Basic Configuration
35
DWC-1000 Wireless Controller User’s Guide
Field Description
Channel
Operating channel for the radio.
Basic Configuration Step #3. Change the SSID Name and Set Up Security
You can configure up to 64 separate networks on the wireless controller and apply them
across multiple radio and virtual access point interfaces. By default, 16 networks are pre-
configured and applied in order to the access points on each radio. In this procedure, you
will edit one of the preconfigured networks and change its SSID and security settings to suit
your requirements.
1. Click ADVANCED > SSIDs. The following NETWORKS page appears, with a list of the
wireless networks configured on the wireless controller.
2. Under the SSID column, click an SSID. The following NETWORKS page appears.
To Next Page
Loading...
