Troubleshooting
215
DWC-1000 Wireless Controller User’s Guide
Network Performance and Rogue Access Point Detection
When rogue access point detection is enabled, access points intermittently go off channel
for short periods, which can affect network performance. If security concerns are more
important than network performance, you can enable rogue access point detection. If
network performance is more important than security concerns, you can temporarily disable
rogue access point detection.
Using Diagnostic Tools on the Wireless Controller
Pinging an IP Address
Path: TOOLS > System Check
As part of the diagnostics functions on the wireless controller, you can ping an IP address.
You can use this function to test connectivity between the wireless controller and another
device on the network connected to the wireless controller.
1. Click TOOLS > System Check. The SYSTEM CHECK page appears.
2. Under Ping or Trace an IP Address, in the IP Address / Domain Name field, enter an IP
address to be pinged.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
