Advanced Configuration Settings
52
DWC-1000 Wireless Controller User’s Guide
Defining DSCP and CoS Settings
After you enable QoS mode, use the procedures in the following sections to configure the
values and priorities used by DSCP and CoS.
Configuring DSCP Priorities
Path: SETUP > QoS > LAN QoS > IP DSCP Configuration
If you selected DSCP for your QoS configuration, use the following procedure to configure
and assign priority to the DSCP fields in IP packets.
1. Click SETUP > QoS > LAN QoS > IP DSCP Configuration. The PORT DSCP MAPPING
page appears. Each row corresponds to a DSCP field in an IP packet.
To Next Page
Loading...
