D-Link DWC-1000 User Guide

124
DWC-1000 Wireless Controller User’s Guide
7. VIEWING STATUS AND STATISTICS
This chapter describes the following pages, which display wireless controller and access
point status information and statistics.
Path Description See
Page
STATUS > Dashboard > General Shows CPU and memory utilization.
126
STATUS > Device Info > System Status Summarizes the wireless controller configuration settings.
128
STATUS > Device Info > Wireless LAN AP Info Shows details about the managed access points.
130
STATUS > Device Info > Cluster Information Shows information about other wireless controllers in the network.
132
STATUS > Dashboard > Interface Shows information about resources the system is using.
134
STATUS > Traffic Monitor > Device Statistics Shows detailed transmit and receive statistics for each physical port.
136
STATUS > Traffic Monitor > Managed AP
Statistics
Shows information about traffic on the access point’s wired and wireless
interfaces.
137
STATUS > Traffic Monitor > Associated Clients
Statistics > WLAN Associated Clients
Tracks the traffic associated with the client connected to the wireless controller.
139
STATUS > Wireless Client Info > Associated
Clients > Status
Shows statistics about client traffic while the client is associated with a single
access point as well as throughout the roaming session.
141
STATUS > Active Sessions Shows local and remote IP addresses, protocol used during the Internet sessions,
and state.
142
STATUS > Associated Clients > Status Shows clients associated with the managed access points.
143
STATUS > LAN Clients Info > LAN Clients Shows NetBios name (if available) and IP and MAC addresses of discovered LAN
hosts.
145
STATUS > LAN Clients Info > Detected Clients Shows information about clients that have authenticated with an access point, and
clients that disassociate and are no longer connected to the system.
146
STATUS > Dashboard > Access Point Shows summary information about managed, failed, and rogue access points the
wireless controller has discovered or detected.
148
STATUS > Access Points Info > APs Summary Shows summary information about managed, failed, and rogue access points the
wireless controller has discovered or detected. Status entries can be deleted
manually.
150
Access Point Info > Managed AP Status
Shows a variety of information about each access point that the wireless
controller is managing.
152
Status > Access Point Info > Authentication
Failure Status
Shows information about access points that failed to establish communication
with the wireless controller.
154

D-Link DWC-1000 Specifications

General

Ethernet LAN	Yes
Wi-Fi standards	802.11a, 802.11b, 802.11g
Networking standards	IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3ad, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Number of managed Wi-Fi Access Points (max)	6
Security algorithms	3DES, DES, WEP, WPA, WPA2
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Certification	FCC B, CE B, VCCI, C-tick, IC, cUL, LVD (EN60950-1)
Built-in display	No
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Power requirements	DC 12V/2.5A
Power consumption (typical)	19.3 W
Pallet width	1200 mm
Pallet length	1100 mm
Pallet height (air)	1419 mm
Pallet height (sea)	1847 mm
Pallet gross weight (air)	415236 g
Pallet gross weight (sea)	545648 g
Quantity per pallet (air)	144 pc(s)
Quantity per pallet (sea)	192 pc(s)
Shipping (inner) case width	296 mm
Shipping (inner) case height	428 mm
Shipping (inner) case length	354 mm
Shipping (inner) case weight	10826 g
Shipping (inner) case net weight	10016 g
Number of cartons per pallet (air)	36 pc(s)
Number of cartons per pallet (sea)	48 pc(s)
Quantity per shipping (inner) case	4 pc(s)

Weight and Dimensions

Package depth	396 mm
Package width	273 mm
Package height	80 mm
Package weight	2504 g
Dimensions (WxDxH)	280 x 180 x 44 mm