D-Link DWC-1000

Viewing Status and Statistics
125
DWC-1000 Wireless Controller User’s Guide
Path Description See
Page
Status > Access Point Info > AP RF Scan Status
Shows information about other access points and wireless clients that the
wireless controller has detected.
156
Path: STATUS > Global Info > Global Status Shows status and statistics about the wireless controller and the objects
associated with it.
158
Status > Global Info > Peer Controller > Status
Shows information about other wireless controllers in the network. 161
Status > Global Info > Peer Controller >
Configuration
Shows information about the access points that each peer controller in the cluster
manages.
163
Status > Global Info > Peer Controller >
Managed AP
Shows information about the access points that each peer controller in the cluster
manages.
164
Status > Global Info > IP Discovery Shows IP addresses of peer controllers and access points for the wireless
controller to discover and associate with as part of the WLAN.
166
Status > Global Info > Config Receive Status
Shows information about the configuration a controller receives from a peer. 168
Status > Global Info > AP H/W Capability Shows information about radio hardware and IEEE mode supported by access
points, along with software images available for downloading to access points.
170
Status > Dashboard > Client
Shows information about all the clients connected through managed access
points.
171
Status > Wireless Client Info > Associated
Clients > Status
Shows a variety of information about the wireless clients that are associated with
the access points the wireless controller is managing.
173
STATUS > Wireless Client Info > Associated
Clients > SSID Status
Shows SSID information for the wireless clients on the WLAN. 175
STATUS > Wireless Client Info > Associated
Clients > VAP Status
Shows information about the virtual access points on the managed access point
that are associated wireless clients.
177
STATUS > Wireless Client Info > Associated
Clients > Controller Status
Shows information about the controller that manages the access point to which
the client is associated.
179
STATUS > Wireless Client Info > Detected
Clients
Shows information about clients that have authenticated with an access point and
clients that have disassociated and are no longer connected to the system.
181
STATUS > Wireless Client Info > Pre-Auth
History
Shows detected clients that have made pre-authentication requests and identifies
the access points that received the requests.
183
STATUS > Wireless Client Info > Roam History Shows a client’s roaming history between access points.
184