Troubleshooting
218
DWC-1000 Wireless Controller User’s Guide
Capturing Log Packets
Path: TOOLS > System Check
The wireless controller lets you capture all packets that pass through the LAN or Option
interface. The packet trace is limited to 1 MB of data per capture session. If the capture file
size exceeds 1MB, it is deleted automatically and a new capture file is created.
To capture packets:
1. Click TOOLS > System Check. The SYSTEM CHECK page appears.
2. Under Router Options, in the Capture Packets field, enter an Internet name.
3. Click Lookup. The results are shown in the Command Output page. If the host or domain
entry exists, a response appears with the IP address. If the message Host Unknown
appears, the Internet name does not exist.
4. Click Back to return to the SYSTEM CHECK page.
To Next Page
Loading...
