EasyManuals Logo

D-Link DWC-1000 User Guide

D-Link DWC-1000
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #144 background imageLoading...
Page #144 background image
Viewing Status and Statistics
144
DWC-1000 Wireless Controller User’s Guide
Field Description
Status
Indicates whether the client is associated and/or authenticated. The valid values are:
Associated = client is currently associated to the managed access point.
Authenticated = client is currently associated and authenticated to the managed access point.
Disassociated = client has disassociated from the managed access point. If the client does not
roam to another managed access point within the client roam timeout, it is deleted.
Table 7-11. Buttons on the ASSOCIATED CLIENTS STATUS Page
Button Description
Disassociate Disassociates the client from the managed access point.
View Details
For each client associated with an access point that the wireless controller manages, you can
view detailed status information about the client and its association with the access point.
View Neighbor Status Shows information about access points that the client detects. The information on this page can
help you determine the managed access point an associated client might use for roaming.
View Distributed Tunneling Status
Shows information about access points that the client detects. The tunnelling mode is used to
support L3 roaming for wireless clients without forwarding any data traffic to the wireless
controller.
View SSID Details Each managed access point can be from different networks that each have a unique SSID.
Although several wireless clients might be connected to the same physical AP, they might not
connect by using the same SSID. The WLAN > Monitoring > Client > Associated Clients >
SSID Status page lists the SSIDs of the networks that each wireless client associated with a
managed access point has used for WLAN access.
View VAP Details
Each access point has a set of Virtual Access Points (VAPs) per radio, and every VAP has a
unique MAC address (BSSID). This displays the VAP Associated Client Status page, which
shows information about the VAPs on the managed AP that have associated wireless clients.

Table of Contents

Other manuals for D-Link DWC-1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DWC-1000 and is the answer not in the manual?

D-Link DWC-1000 Specifications

General IconGeneral
Ethernet LANYes
Wi-Fi standards802.11a, 802.11b, 802.11g
Networking standardsIEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3ad, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Number of managed Wi-Fi Access Points (max)6
Security algorithms3DES, DES, WEP, WPA, WPA2
USB 2.0 ports quantity2
Ethernet LAN (RJ-45) ports4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
CertificationFCC B, CE B, VCCI, C-tick, IC, cUL, LVD (EN60950-1)
Built-in displayNo
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Power requirementsDC 12V/2.5A
Power consumption (typical)19.3 W
Pallet width1200 mm
Pallet length1100 mm
Pallet height (air)1419 mm
Pallet height (sea)1847 mm
Pallet gross weight (air)415236 g
Pallet gross weight (sea)545648 g
Quantity per pallet (air)144 pc(s)
Quantity per pallet (sea)192 pc(s)
Shipping (inner) case width296 mm
Shipping (inner) case height428 mm
Shipping (inner) case length354 mm
Shipping (inner) case weight10826 g
Shipping (inner) case net weight10016 g
Number of cartons per pallet (air)36 pc(s)
Number of cartons per pallet (sea)48 pc(s)
Quantity per shipping (inner) case4 pc(s)
Weight and Dimensions IconWeight and Dimensions
Package depth396 mm
Package width273 mm
Package height80 mm
Package weight2504 g
Dimensions (WxDxH)280 x 180 x 44 mm

Related product manuals