Viewing Status and Statistics
157
DWC-1000 Wireless Controller User’s Guide
Table 7-20. Fields on the AP RF SCAN STATUS Page
Field Description
MAC Address Ethernet MAC address of the detected access point. This could be a physical radio interface or
VAP MAC.
SSID
Service Set ID of the network, which is broadcast in the detected beacon frame.
Physical Mode
802.11 mode used on the access point.
Channel
Transmit channel of the access point.
Status
Managed status of the access point. The valid values are:
• Managed = neighbor access point is managed by the wireless system.
• Standalone = access point is managed in standalone mode and configured as a valid AP entry
(local or RADIUS).
• Rogue = access point is classified as a threat by one of the threat detection algorithms.
• Unknown = access point is detected in the network but is not classified as a threat by the
threat detection algorithms.
Age
Time since this access point was last detected in an RF scan. Status entries for this page are
collected at a point in time and eventually age out. The age value for each entry shows how long
ago the wireless controller recorded the entry.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
