Maintenance
194
DWC-1000 Wireless Controller User’s Guide
a. Under Group Policy By Source IP Address, click Deny Login from Defined
Addresses.
b. Click the Add button. The DEFINED ADDRESSES page appears.
c. Complete the fields in the page (see Table 8-3) and click Save Settings. The address
you defined appears in the Defined Addresses area.
5. To allow the users in this user group to log in to the web management interface using a
particular network or IP address:
a. Under Group Policy By Source IP Address, click Allow Login from Defined
Addresses.
b. Click the Add button. The DEFINED ADDRESSES page appears.
c. Complete the fields in the page (see Table 8-3) and click Save Settings. The address
you defined appears in the Defined Addresses area.
6. To remove addresses from the Defined Addresses area:
a. Click each address. (Or click the box next to Added Client Browser to select all
addresses.)
b. Click Delete. A precautionary message does not appear prior to deleting the
addresses.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
