D-Link DWC-1000

Unpacking and Installation
23
DWC-1000 Wireless Controller User’s Guide
To configure the wireless controller for this configuration, use the procedure below.
Step Configuration Path in web Management Interface
See
Page
1. Under the SSID column, click an SSID. ADVANCED > SSIDs 48
2. Edit the SSID name, if necessary.
3. Enter the RADIUS authentication server name.
4. Optional: Enter the RADIUS accounting server name.
5.
Optional: Select a RADIUS use network configuration.
6.
Optional: Check RADIUS accounting.
7.
Optional: Enter a RADIUS authentication server name.
8.
Optional: Enter a RADIUS accounting server name.
9.
Click Save Settings.