Software User Manual D-Link UAP
12/10/09
34CSFP6XXUAP-SWUM100-D13 About This Document Page 11
Section 1: About This Document
This guide describes setup, configuration, administration and maintenance for the D-Link
®
Unified Access Point (UAP) on a
wireless network.
DOCUMENT ORGANIZATION
The
Unified Access Point Administrator’s Guide
contains the following sections:
• Section 1: “About This Document” on page 11
• Section 2: “Getting Started” on page 14
• Section 3: “Viewing Access Point Status” on page 27
• Section 4: “Managing the Access Point” on page 37
• Section 5: “Configuring Access Point Services” on page 67
• Section 6: “Configuring SNMPv3” on page 77
• Section 7: “Maintaining the Access Point” on page 82
• Section 8: “Configuring Client Quality of Service” on page 87
• Section 9: “Clustering Multiple APs” on page 103
• Appendix A “Default AP Settings” on page 114
• Appendix B “Configuration Examples” on page 116
ADDITIONAL DOCUMENTATION
The following documents are also available for the D-Link UAP.
• The
Unified Access Point
CLI Command Reference
contains information about using the UAP command-line interface.
• The
Unified Access Point Release Notes
describe known issues and limitations.
To Next Page
Loading...
