Software User Manual D-Link UAP
12/10/09
34CSFP6XXUAP-SWUM100-D13 Configuring Access Point Services Page 67
Section 5: Configuring Access Point Services
This section describes how to configure services on the UAP and contains the following subsections:
• Configuring the Web Server Settings
• Configuring SNMP on the Access Point
• Configuring Quality of Service (QoS)
• Enabling the Network Time Protocol Server
The configuration pages for the features in this section are located under the Service heading on the navigation tree of the
UAP Web UI.
CONFIGURING THE WEB SERVER SETTINGS
The AP can be managed through HTTP or secure HTTP (HTTPS) sessions. By default both HTTP and HTTPS access are
enabled. Either access type can be disabled separately.
To configure Web server settings, click Web Server tab.
Figure 19: Configuring Web Server Settings
To Next Page
Loading...
