D-Link UAP Software User Manual
12/10/09
Page 36 Viewing Managed AP DHCP Information 34CSFP6XXUAP-SWUM100-D13
VIEWING MANAGED AP DHCP INFORMATION
The UAP can learn about D-Link Unified Switches on the network through DHCP responses to its initial DHCP request. The
Managed AP DHCP page displays the DNS names or IP addresses of up to four D-Link Unified Switches that the AP learned
about from a DHCP server on your network.
For information about how to configure a DHCP server to respond to AP DHCP requests with the switch IP address
information, see the
Administrator Guide
for the switch.
Rates Shows supported and basic (advertised) rate sets for the neighboring AP. Rates are shown in
megabits per second (Mbps).
All Supported Rates are listed, with Basic Rates shown in bold.
Rate sets are configured on the Radio Settings page. (See “Modifying Radio Settings” on
page 43.)
Table 11: Neighboring Access Points (Cont.)
Field Description
To Next Page
Loading...
