Software User Manual D-Link UAP
12/10/09
34CSFP6XXUAP-SWUM100-D13 Configuring Quality of Service (QoS) Page 73
Figure 23: Configuring QoS Settings
Table 33: QoS Settings
Field Description
AP EDCA Parameters
Queue Queues are defined for different types of data transmitted from AP-to-station:
• Data 0 (Voice)—High priority queue, minimum delay. Time-sensitive data such as VoIP and
streaming media are automatically sent to this queue.
• Data 1 (Video)—High priority queue, minimum delay. Time-sensitive video data is
automatically sent to this queue.
• Data 2 (best effort)—Medium priority queue, medium throughput and delay. Most traditional
IP data is sent to this queue.
• Data 3 (Background)—Lowest priority queue, high throughput. Bulk data that requires
maximum throughput and is not time-sensitive is sent to this queue (FTP data, for example).
AIFS
(Inter-Frame Space)
The Arbitration Inter-Frame Spacing (AIFS) specifies a wait time for data frames. The wait time
is measured in slots. Valid values for AIFS are 1 through 255.
To Next Page
Loading...
