D-Link UAP Software User Manual
12/10/09
Page 28 Viewing Events 34CSFP6XXUAP-SWUM100-D13
For information about configuring these settings, see “Configuring the Ethernet Settings” on page 22.
WIRELESS SETTINGS
The Radio Interface includes the Radio Mode and Channel. The Wireless Settings section also shows the MAC address
(read-only) associated with each radio interface.
If you want to change the Radio Mode or Channel settings, click the Edit link. After you click Edit, you are redirected to the
Wireless Settings page.
For information about configuring these settings, see “Wireless Settings” on page 40 and “Modifying Radio Settings” on
page 43.
VIEWING EVENTS
The Events page shows real-time system events on the AP such as wireless clients associating with the AP and being
authenticated.
To view system events, click the Events tab.
Figure 3: Viewing Events
From the Events page, you can view the most recent events generated by this AP and configure logging settings. You can
enable and configure persistent logging to write system event logs to non-volatile memory so that the events are not erased
when the system reboots. This page also gives you the option of enabling a remote log relay host to capture all system events
and errors in a Kernel Log.
To Next Page
Loading...
