EasyManua.ls Logo

D-Link DWL-8600AP

D-Link DWL-8600AP
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Software User Manual D-Link UAP
12/10/09
34CSFP6XXUAP-SWUM100-D13 Viewing Wireless Neighborhood Information Page 115
Fixed Multicast Rate Auto
Beacon Interval 100
DTIM Period 2
Fragmentation Threshold 2346
RTS Threshold 2347
Virtual Access Point Settings
Status VAP0 is enabled on both radios, all other VAPs disabled
VLAN ID 1
Network Name (SSID) dlink1 through dlink16
Broadcast SSID Allow
Security Mode None (plain text)
Authentication Type None
RADIUS IP Address 10.90.90.1
RADIUS Key secret
RADIUS Accounting Disabled
HTTP Redirect None
Other Default Settings
WDS Settings None
STP Disabled
MAC Authentication No stations in list
Load Balancing Disabled
SNMP Enabled
RO SNMP Community Name Public
Managed AP Mode Disabled
Authentication (802.1X Supplicant) Disabled
Management ACL Disabled
HTTP Access Enabled; disabled in Managed Mode
HTTPS Access Enabled; disabled in Managed Mode
SNMP Agent Port 161
SNMP Set Requests Disabled
Console Port Access Enabled
Telnet Access Enabled; disabled in Managed Mode
SSH Access Enabled; disabled in Managed Mode
WMM Enabled
Network Time Protocol (NTP) None
Clustering Stopped
Client QoS Global Admin Mode Disabled
VAP QoS Mode Disabled
Table 52: UAP Default Settings (Cont.)
Feature Default

Table of Contents

Other manuals for D-Link DWL-8600AP

Related product manuals